Categories: ,

Dry sandblasting cabin for wheel rims

Thorough, efficient and ergonomic, this machine can be perfectly integrated into the wheel refurbishment workflow. The PWW wheel dry blast cabinet is supplied ready for connection, incl. 25kg of blasting material.

Nec sed lectus in rhoncus tellus nulla dui vestibulum suspendisse velit odio et tristique.

PWW dry blast cabinet (Kopie)

13.500,00 € zzgl. MwSt.

PWW dry blast cabinet (Kopie)

PWW-Web-Sandstrahlkabine-Seitl-Li Tür + Sichtfenster 8 Liter Druckgefäß Stahlgehäuse

Powder-coated steel housing

Pressure regulator for fine adjustment

Durable nozzles made from high-quality material

6 filter bags for easy cleaning and low maintenance

Compact, high quality, powerful

The PWW dry sandblasting machine impresses with its even and gentle paint preparation, which thoroughly reaches even the smallest gaps between the rims.
Paint preparation takes just a few minutes, which speeds up the work process considerably.
Spare parts are available from us at any time and the simple loading of the rims makes handling even easier.

DOOR

  • Single front opening door as standard
  • Door opening dimension: 1150mm Wide X 740mm High

CONSTRUCTION

  • 2mm mild steel, etch primed exterior and fully powder coated to Ral 9007 in grey or white.

VIEWING WINDOW

  • Glass type: 6mm toughened glass with replaceable protective screen
  • OPERATORS HANDLING
  • Heavy duty rubber gauntlets, size 10 66cm, Level 4 abrasion resistance
  • Air blow off gun to clear excess media from workpiece

LIGHTING

  • Twin 500mm energy saving Led light bars IP44 rated
  • Mounted externally illuminating through 6mm toughened glass
  • Replaceable protective screen

EXTRACTOR MOTOR

  • 1.5kw, 2 pole, 2760 RPM
  • 8.87amps, 0.98 Power factor ELECTRICAL CONTROL
  • Standard 230 Volt 50 HZ.
    front facing enclosure
  • Ip65 Rated Isolator Switch, Light, Extractor Control And Emergency Stop

DUST COLLECTION

  • Free standing
  • 6 filter bags
  • Manually operated bag shaker
  • 250 CFM Air volume rating
  • Dust storage hopper with drop down flap for ease of emptying into a sealed bag

BLAST GENERATOR

  • 8 liter pressure pot mounted to the bottom of the cabinet hopper
  • pressure release valve
  • Media control valve KB type 15mm Straight through valve, grade AA Natural rubber diaphragm
  • Cabinet has internal sieve mesh to stop any blockages
  • Blast hose Antistatic-high tensile shot blast hose 12 bar 120psi max, 13mm inner diameter, wall thickness 6mm
  • Moisture separator 1/2″ BSP (12.5mm) with semi-automatic drain
  • Blast gun Easy handling light weight nylon gun.
    All nozzles are a boron carbide insert with an aluminum casing

MACHINE NOISE LEVEL

  • Extractor unit only 75 dBA
  • Plus blasting @ 80 psi 80 dBA
  • Plus blasting an object 85 dBA

We recommend an area of X x Y m in order to be able to work optimally on the dry blast cabin.
Our machines can be flexibly repositioned with their four castors.
After setting up and connecting the compressed air and power supply (see next point for details), you can start working straight away.

Compressed air

The PWW dry blast cabinet is supplied with a half-inch bsp external thread and 3 m of air line.
You will need a half inch bsp FEMALE fitting connected to your air supply.
If required, we can supply a reducer to ½ inch with your machine.
The air tap should be no further than 3 m from where the machine is to be installed.
The air line should not be restricted by connections with a smaller diameter (plug connections).
Your compressor should be equipped with a dryer and have a capacity of 18CFM to 30CFM.

Power connection

The blasting cabinet is supplied with a single-phase 3-pin 240 V CEE plug.

3D view



Related products

    Additional information

    Weight 400 kg
    Dimensions 160 × 120 × 200 cm
    External dimensions

    200 x 110 x 195 cm (W x D x H)
    Internal dimensions

    120 X 100 X 85 cm (W x D x H)
    Weight

    xxx kg
    Guarantee

    1 year on housing, electrics and machine parts